Bronze Wafer Check Valve
The function of the Bronze Wafer Check Valve is to control the one-way flow direction of the valve in the pipeline, so as to prevent the backflow of the medium in the pipeline. The check valve belongs to the automatic valve type, and the opening and closing part is opened or closed by the force of the flowing medium. Check valve is only used for one-way flow of medium pipeline, to prevent media backflow, in order to prevent accidents. It is mainly used in petroleum, chemical, pharmaceutical, fertilizer, power and other pipelines.
Product Description
The function of the Bronze Wafer Check Valve is to control the one-way flow direction of the valve in the pipeline, so as to prevent the backflow of the medium in the pipeline. The check valve belongs to the automatic valve type, and the opening and closing part is opened or closed by the force of the flowing medium. Check valve is only used for one-way flow of medium pipeline, to prevent media backflow, in order to prevent accidents. It is mainly used in petroleum, chemical, pharmaceutical, fertilizer, power and other pipelines.
Technical Specification
Normal SizeRange:
2"-60"
Normal Pressure Rating: PN10~PN420, CLASS150~2500
Material: WCB,LCB,WC6,CF8,CF8M,CF3,CF3M
TemperatureRange: -29~425Degree C
Standards compliance
Design and Manufacture: API 594, API 6D, JB/T8937
Face to face(end to end): API 594, API 6D, JB/T8937, DIN3202
Flanged connection: ANSI B16.5, DIN2543~48, JB/T9112~24
Butt welded end: ANSI B16.25
Test and inspection: API598, DIN3230, JB/T9092
Welcome to our website! Please send your words at any time in the following form and ask us, we will contact you and provide you with the corresponding service as soon as possible. Please write in English.
Inner Wafer Dual Plate Check Valve
KOSEN Inner Wafer Dual Plate Check Valves are suitable for using on various kinds of pipeline from Class150 To Class2500, PN20 To PN420 to cut off or connect the flowing of medium. By using different material, the valves could be suitable for medium such as water, steam, oil, nitric acid, acetic acid, oxidizing substance, carbamide and etc.
Learn More
Cast Steel Lug Wafer Dual Plate Check Valve
KOSEN Cast Steel Lug Wafer Dual Plate Check Valves has retainer and retainerless type design. Dual-disc check valves have the advantage of zero leakage toward outside, cost saving. It can be installed in any line orientation, superior seal performance. Valves are designed in accordance to API 594 and have dual disc or single disc design and pin can be retainerless type.
Learn More
Cast Iron Wafer Check Valve
The Cast Iron Wafer Check Valves is made by foreign advanced structural design in our factory, which is in line with relevant national standards and belongs to energy saving products. This product has good check performance, safety and reliability, and low flow resistance coefficient. It is mainly used in petroleum, chemical industry, food, medicine, textile, paper making, water supply and drainage, smelting and energy system.
Learn More
Wafer Single Disc Check Valve
The Wafer Single Disc Check Valves, also known as single check valve and check valve, is a valve which can automatically prevent fluid from backflow. The disc of the check valve is opened under the action of fluid pressure, and the fluid flows from the inlet side to the outlet side. When the inlet side pressure is lower than the outlet side, the disc automatically closes under the influence of fluid pressure, gravity and other factors to prevent fluid backflow. It can be installed horizontally or vertically. The vertical installation should pay attention to the water flow from bottom to top. When installing, pay attention to whether the installation direction is correct.
Learn More