Cast Iron Ball Valve
Cast Iron Ball Valves are used in commercial, industrial, and process applications requiring a non-corrosive body finish or where a clean cosmetic appearance is desired.
Product
Description
Cast Iron Ball Valves are used in commercial, industrial, and
process applications requiring a non-corrosive body finish or where a clean
cosmetic appearance is desired.
Nominal pressure: 150LB
Material: A126-B
Temperature Range: -29 ~425Degree C
Actuator mounting pad: ISO5211
Standards
compliance
Design and Manufacture: ANSI B16.34
Face to face(end to end): ANSI B16.10
Flanged connection: ANSI 16.10
Structural length: ANSI 16.10
Test and inspection: API 598,API 6D
Stress test: Shell Test 400psi (by water )
Seal Test: 320psi (by water)
Seal Test: 60~100psi(by air)
Welcome to our website! Please send your words at any time in the following form and ask us, we will contact you and provide you with the corresponding service as soon as possible. Please write in English.
Cast Trunnion Ball Valve
KOSEN Cast Trunnion Ball Valve have been designed for severe oil and gas applications,including production,transportation and distribution.
KOSEN Cast Trunnion Ball Valve designed the Side-Entry Trunnion-Mounted Ball Valves to assure bi-directional sealing of the valve with two independent floating seats. The design of these seats minimizes the torque required to operate the valve without losing the sealing power. This power is assured by zero differential pressure to the valve's maximum rated pressure. In addition, these repairable valves are manufactured to seal off both seats at the same time and to allow bleeding of the entrapped cavity pressure (DBB) with the ball in the closed position. The DBB feature allows for verifying that the seats are properly sealing.
Cryogenic Ball Valve
The cryogenic ball valve is applicable to different pipeline.By adopting different materials, the cryogenic ball valve is applicable to different working temperature and medium.The minimum temperature for the ball valve is -196 Degree C . The operation of the ball valve can be manual operated, gear operated, pneumatic operated and motor operated. The end connection usually is flanged ends. However, the welded ends are also optional.
Learn More
Cast Floating Ball Valve
KOSEN Cast Floating Ball Valves are designed manufactured to provide maximum service life and dependability. All ball valves are full ported and meet the design requirements of American Petroleum Institute Standard API 608&API 6D British standard BS5351 and generally conform to American Society of Mechanical engineers standard ASME B16.34 valves are available in a complete range of bady/bonnet materials and trims.
Learn More
Cast Bronze Ball Valve
Ball valves are mainly used to cut or connect medium in the pipeline, and can also be used to regulate and control the fluid. The hard sealed V ball valve has a strong shear force between the V core and the metal valve seat of the hardfacing hard alloy. It is especially suitable for the medium containing fiber and small solid material. The multi - ball valve can not only flexibly control the switching of the flow, shunt and flow of the medium, but also close any channel and connect the other two channels. This type of ball valves should be installed horizontally in pipes.
Learn More