Flanged End Pressure Seal Check Valve

KOSEN Cast Bronze Check Valves is used to prevent back flow in the line .Flow is in a straight line through the valve resulting in minimal pressure drop . The disc swings into the open position as the media flows through the line .Back pressure in the line holds the disc in the closed position .
KOSEN Cast Bronze Check Valves may be installed in horizontal or vertical lines ,but must be installed in proper relation to the media flow as indicated by the flow direction arrow marked on the body .

KOSEN Investment Casting Screwed Check Valves is used to prevent back flow in the line .Flow is in a straight line through the valve resulting in minimal pressure drop . The disc swings into the open position as the media flows through the line .Back pressure in the line holds the disc in the closed position .
KOSEN Investment Casting Screwed Check Valves may be installed in horizontal or vertical lines ,but must be installed in proper relation to the media flow as indicated by the flow direction arrow marked on the body .

KOSEN Butterfly Type Check Valves is a double offset , triple offset butterfly type check valve. It is equipped with a buffer to slow down the closing speed to make partial medium enter the system in order to greatly eliminate the backflow slamming and the destructive pressure surge when pump stops working. It is mainly mounted at outlet side of the pump station in industrial water recycling supply system, urban water supply system, high-rise buildings and modern hotels. The model is designed to have non-vibration non-slam performance in consideration of special application environment. It has good sealing, smooth operation, long service life, energy saving advantage to make the living environment quiet and comfortable.

The KOSEN Axial flow Check Valve is composed of valve body, valve seat, guide body, disc, bearing and spring. The internal flow path is streamlined design, the pressure loss is small, the valve opening and closing stroke is very short, the pump can be closed quickly when the pump is stopped, so as to prevent the sound of the huge water hammer and form the silent effect. The valve is mainly used in water supply, drainage, fire fighting, HVAC, petrochemical, electric and other industrial projects. It can be installed at the outlet of the pump to prevent the reverse flow of medium and the damage to the equipment by water hammer.