Wafer Single Disc Check Valve
The Wafer Single Disc Check Valves, also known as single check valve and check valve, is a valve which can automatically prevent fluid from backflow. The disc of the check valve is opened under the action of fluid pressure, and the fluid flows from the inlet side to the outlet side. When the inlet side pressure is lower than the outlet side, the disc automatically closes under the influence of fluid pressure, gravity and other factors to prevent fluid backflow. It can be installed horizontally or vertically. The vertical installation should pay attention to the water flow from bottom to top. When installing, pay attention to whether the installation direction is correct.
Product Description
The Wafer Single Disc Check Valves, also known as single check valve and check valve, is a valve which can automatically prevent fluid from backflow. The disc of the check valve is opened under the action of fluid pressure, and the fluid flows from the inlet side to the outlet side. When the inlet side pressure is lower than the outlet side, the disc automatically closes under the influence of fluid pressure, gravity and other factors to prevent fluid backflow. It can be installed horizontally or vertically. The vertical installation should pay attention to the water flow from bottom to top. When installing, pay attention to whether the installation direction is correct.
Technical Specification
Normal SizeRange:
2"-24"
Normal Pressure Rating: CLASS150~300
Material: A105,LF2,F304,F304L,F316,F316L
TemperatureRange: -29~425Degree C
Standards compliance
Design and Manufacture: API 594, API 6D, JB/T8937
Face to face(end to end): API 594, API 6D, JB/T8937, DIN3202
Flanged connection: ANSI B16.5, DIN2543~48, JB/T9112~24
Butt welded end: ANSI B16.25
Test and inspection: API598, DIN3230, JB/T9092
Welcome to our website! Please send your words at any time in the following form and ask us, we will contact you and provide you with the corresponding service as soon as possible. Please write in English.
Wafer Type Flange Check Valve
KOSEN Wafer Type Flange Check Valve has retainer and retainer-less type design. Dual plate check valves have the advantage of zero leakage toward outside, cost saving. It can be installed in any line orientation, superior seal performance. Valves are designed in accordance to API 594 and have dual plate or single plate design and pin can be retainer-less type.
Learn More
Cast Iron Wafer Check Valve
The Cast Iron Wafer Check Valves is made by foreign advanced structural design in our factory, which is in line with relevant national standards and belongs to energy saving products. This product has good check performance, safety and reliability, and low flow resistance coefficient. It is mainly used in petroleum, chemical industry, food, medicine, textile, paper making, water supply and drainage, smelting and energy system.
Learn More
Wafer Single Disc Swing Check Valve
KOSEN Wafer Single Disc Swing Check Valves has short structure length, small size, light weight, fast closure of valve disc, small pressure of water hammer, convenient installation, small fluid resistance, sensitive movement, good sealing performance, short stroke and small impact force of the valve, the whole structure, simple compact, long service life, high reliability and so on.
Learn More
Wafer Inclined Flap Check Valve
KOSEN Wafer Inclined Flap Check Valve, installed in the municipal, construction, steel, metallurgy, petroleum, chemical, food, medicine, power plant, water conservancy and irrigation and other fields of water intake, water supply, pressure, diving, sewage pumping room and oil, chemical fluid transportation system, melting electric valve, check valve and water hammer eliminator three equipment functions in one, It can effectively improve the safety and reliability of the system, meet the requirements of system automation control and energy saving.
Learn More