Three Way Diaphragm Valve

The KOSEN Three Way Diaphragm Valves is used to control non corrosive or general corrosive medium. The inner cavity surface of the valve body is unlined or covered with various kinds of rubber, suitable for different working temperature and fluid pipeline. The variety of lining materials can be applied to all kinds of media and has good corrosion resistance. The valve body and the cover are separated by the middle diaphragm, so that the valve cover and the valve stem part of the diaphragm are not eroded by the medium, and the diaphragm valve is a special stop valve.

Technical Specification
Normal Size Range: 1/2"-16"
Normal Pressure Rating: PN10~PN16, CLASS150
Operation: Handwheel, Pneumatic, Electric
Temperature Range: -29~150 Degree C

Standards compliance
Design & Manufacture: BS 5156-85, MSS SP-88, GB 12239-89
Face to Face Dimension: BS 5156-85, ANSI B16.10, GB 12221-85, DIN 3202
Flanged Dimension: BS 5156-85, ANSI B16.5, EN 1092, GB/T 17421-98
Inspect & Test: BS 5156, MSS SP-82, GB/T 13927

Component Materials
Body / Bonnet: Cast Iron, Ductile Iron, Cast Steel, Stainless Steel & Duplex
Lining (Optional): 
Fluorine -- PTFE, FEP, PCTFE, PVDF, TFE, PFA, RPP, PO
Rubber  -- NR, BR, IIR, CR, EPDM, CSPE, FKM, SI
Diaphragm: Rubber 
Compressor / Disc: Cast Iron, Ductile Iron, Cast Steel, Stainless Steel
Stem: Carbon Steel & Stainless Steel
Handwheel: Iron & Steel